63
62
EN
EN
9
The cordless impact wrench variant
Extol® Industrial 8791812
is supplied with a Li-ion battery
2000 mAh
,
20 V
and a charger with a charging current of
2.4 A
.
9
The cordless impact wrench variant
Extol® Industrial 8791813
is supplied
wit-
hout a battery and charger
at a lower purchase price for the situation where
the user has already purchased the battery and charger with another cordless
power tool from the
SHARE 20 V cordless product range
.
BATTERIES AND CHARGERS FROM THE CORDLESS PROGRAM SHARE 20 V
ARE AVAILABLE FOR PURCHASE IF REQUIRED
Battery
SHARE 20 V
Model number
(Part number)
Chargers
SHARE 20 V
Model number
(Part number)
Battery
8 000
mAh
Extol® 8891886
4 A
charger
Extol® 8891892
Battery
6 000
mAh
Extol® 8891885
2×
3.5 A
charger (for 2 batteries)
Extol® 8891894
Battery
5 000
mAh
Extol® 8891884
4×
3.5 A
charger (for 4 batteries)
Extol® 8891895
Battery
4 000
mAh
Extol® 8891882
2.4 A
charger
Extol® 8891893
Battery
2 000
mAh
Extol® 8891881
Table 1
II. Technical specifications
Model number (part number)
8791812
1× Li-ion battery 20 V 2000 mAh (8891881)
1× charger 2.4 A (8891893)
8791813
(without battery and charger)
Max. terminal voltage of a battery without load
20 V DC
Nominal terminal voltage of a battery with load
18 V DC
Tool tang
½" square
Max. torque
400 Nm
Digital torque adjustment
100/150/200/300/400 Nm
Speed without load
0-2300 min
-1
Number of percussions
0-3300 min
-1
Weight with battery 2000 mAh
1.9 kg
Sound pressure level Lp(A); uncertainty K
96.38 dB(A); K=±3 dB(A)
Sound power level Lw(A); uncertainty K
107.38 dB(A); K=±3 dB(A)
Max. total vibration value on the handle during operation of the impact wrench a
h
= 19.132 m/s
2
; K= ±1.5 m/s
2
(sum of three axes); uncertainty K
y
The declared aggregate vibration value and the declared
noise emission level were measured in accordance with
standard testing methodology and may be used for the
comparison of one tool with another. The declared aggre-
gate vibration value and the declared noise emission level
may also be used for determining preliminary exposure.
•
WARNING
y
Vibration and noise emissions during actual use of the
power tool may differ from the declared values depen-
ding on the method in which the tool is used, particu-
larly the type of workpiece that is being worked on.
Introduction
Dear customer,
Thank you for the confidence you have shown in the Extol® brand by purchasing this product.
This product has been tested for reliability, safety and quality according to the prescribed norms
and regulations of the European Union.
Contact our customer and consulting centre for any questions at:
www.extol.eu
Manufacturer
: Madal Bal a. s., Průmyslová zóna Příluky 244, 76001 Zlín, Czech Republic
Date of issue
: 2. 3. 2022
I. Description – purpose of use
Powerful
cordless impact wrench
Extol® Industrial
(Max. 400 Nm) with a ½" square tang
and with
digital maximum torque adjustment 100/150/200/300/400 Nm
for the protection
of threaded connections against damage by excessive torque, is intended for tightening and loose-
ning of bolts and nuts using a tool designated for this task.
100•150•200•
300•400
Nm
Max.
400
Nm
9
Impact torque increases power
during screwing, while at the same time reducing power consumption for
extended battery life,
so it is more effective at screwing/bolt tightening tasks than a cordless screwdriver (cordless drill).
9
A brushless motor
(without carbon brushes) pro-
vides more power output with lower battery power
consumption for longer battery life and a longer
motor lifespan.
9
LED light for illuminating the work area.
9
Metal belt clip.
9
Battery has a
charge level indicator
.
9
The cordless impact wrench is part of the
SHARE
20 V
cordless power tool range that is powered
using the same of battery.
The battery is equipped with electronic protection against full discharge and overloading,
which damages it and which shuts off el. power supply when the battery's terminal voltage
falls below a certain threshold.
ONE-BATTERY SYSTEM
