DT40_60_100M-en-GB_v1.0 8/17
18
3.
To view stored readings, press
to enter the datalogger
mode and use +/- keys to scroll. The memory location number
appears at the top of the LCD and the readings appear in the
usual primary and auxiliary display lines.
4.
When scrolling through readings, note that the beeper tone is
different for ‘top’ edge reference readings and ‘bottom’ edge
reference readings.
5.
When all twenty locations have been filled the meter begins
overwriting the existing readings (starting at location 20)
6.
Press the CLR key to exit this mode.
Maintenance
WARNING: Do not operate the meter until the battery
compartment cover is in place and fastened securely.
This instrument is designed to provide years of dependable
service, if the following care instructions are performed:
1.
Keep the meter dry and free from dust.
2.
Use and store the meter in nominal temperature conditions.
Temperature extremes can shorten the life of the electronic
parts and distort or melt plastic parts.
3.
Handle the meter carefully and avoid shock and vibration.
Dropping the meter may damage the electronic parts or the
case. Handle as you would a camera or telescope.
Cleaning
1.
Do not immerse the instrument in water.
2.
Wipe the case occasionally with a damp cloth. DO NOT use
chemicals, cleaning solvents, abrasives, or detergents. Clean
