DT40_60_100M-en-GB_v1.0 8/17
10
7.
To stop measuring, short press MEASURE. Use the CLR key to
delete measurement displays.
8.
Note that the meter exits to the normal mode of operation
after approx. 100 measurements in continuous mode.
Adding / Subtracting Distance Measurements
To display the sum or difference of two distance measurements:
1.
Press the MEASURE key to switch the meter ON. Press
MEASURE to turn Laser ON, if it is not already ON.
2.
Press MEASURE to take the first reading. The reading appears
on the primary display line (bottom).
3.
Press the plus (+) or minus (-) key. The first reading will move
to auxiliary display line 2.
4.
The plus or minus sign will appear on auxiliary display line 3.
5.
Press MEASURE to turn Laser ON, if it is not already ON.
6.
Press MEASURE to take the second reading. The second
reading appears on auxiliary display line 3.
7.
Read the sum or difference of the two readings on the
primary display line.
8.
Press CLR to cancel the last step or press MEASURE to move
the result (now shown in the primary display) to auxiliary
display line 2, for additional adding/subtracting work.
9.
Press CLR to exit this mode or turn the meter OFF.
Area Measurements
Area Calculations
Computing the area of a room:
1.
Press the MEASURE key to turn the meter ON.
