DT40_60_100M-en-GB_v1.0 8/17
12
Auxiliary displays will show the two individual Area
calculations.
Volume Measurements
Volume Calculations
Compute room Volume:
1.
Press the MEASURE key to switch the meter ON.
2.
Press the
key firmly twice.
3.
A cube shape will appear with its Length flashing
indicating that a Length measurement is to be taken.
4.
Press MEASURE to turn Laser ON, if it is not already ON.
5.
Press MEASURE to take the room Length measurement.
6.
The cube’s Width will now be flashing
indicating that a
Width measurement is to be taken.
7.
Press MEASURE to turn Laser ON, if it is not already ON.
8.
Press MEASURE again to take the room Width
measurement.
9.
The cube’s Height side will now be flashing indicating that a
Height measurement is to be taken.
10.
Press MEASURE to turn Laser ON, if it is not already ON.
11.
Press MEASURE to take the room Height measurement
.
12.
Auxiliary display lines 1, 2, and 3 will now show the Length,
Width, and Height respectively. The primary display
(bottom) shows the Volume in cubic feet or meters (ft
3
or
m
3
).
