background image

 

DM220   V3.0   01/06 

Diode Test

 

Test current 1mA, open circuit voltage 1.5V DC typical 

Continuity Check

 

Audible sound if the resistance is less than 100

 

Non-Contact Volt detect 

100 to 600VAC; 50/60Hz 

Input Impedance

 >7.5M

 (VDC & VAC) 

AC Response 

Average responding 

ACV Bandwidth 

50Hz to 60Hz 

Display 

4000 count 3-3/4 digit liquid crystal 

Overrange indication

  “OL” is displayed 

Polarity

 

Automatic (no indication for positive); Minus (-) sign for 

negative 

Auto Power Off 

15 minutes (approx) 

Low Battery Indication  “    ”

 is displayed if battery voltage drops below operating 

voltage 

Batteries

 

Two 1.5 volt AAA

 

Fuses

  

mA, µA ranges; 0.2A/500V fast acting resettable fuse 

Operating Temperature

 32ºF to 104ºF (0ºC to 40ºC) 

Storage Temperature

 14

o

F to 122

o

F (-10

o

C to 50

o

C) 

Operating Humidity 

Max 80% up to 87ºF (31ºC) decreasing linearly to 50% at 

104ºF (40ºC) 

Storage Humidity 

<80%  

Operating Altitude 

7000ft. (2000meters) maximum. 

Weight

  

0.319lb (145g) 

Size

  

4.09” x 2.1” x 1.2” (104 x 55 x 32.5mm) 

Safety 

For origin of installation use and in accordance with the 
requirements for double insulation per EN61010-1 and 
IEC61010-1 2

nd

 Edition (2001) to Overvoltage Category IV 

600V and Category III 1000V; Pollution Degree 2. 

Warranty 

EXTECH INSTRUMENTS CORPORATION

 warrants this instrument to be free of defects in parts 

and workmanship for 

three years 

from date of shipment (a six month limited warranty applies to 

sensors and cables). If it should become necessary to return the instrument for service during or 

beyond the warranty period, contact the Customer Service Department at (781) 890-7440 ext. 210 

for authorization or visit our website www.extech.com for contact information. A Return 

Authorization (RA) number must be issued before any product is returned to Extech. The sender is 

responsible for shipping charges, freight, insurance and proper packaging to prevent damage in 

transit. This warranty does not apply to defects resulting from action of the user such as misuse, 

improper wiring, operation outside of specification, improper maintenance or repair, or 

unauthorized modification. Extech specifically disclaims any implied warranties or merchantability 

or fitness for a specific purpose and will not be liable for any direct, indirect, incidental or 

consequential damages. Extech's total liability is limited to repair or replacement of the product. 

The warranty set forth above is inclusive and no other warranty, whether written or oral, is 
expressed or implied. 

 

 

 
 
 
 
 
 
 

Copyright 

©

 2006 Extech Instruments Corporation 

All rights reserved including the right of reproduction in whole or in part in any form. 

Support line (781) 890-7440 

Technical support: Extension 200; E-mail: [email protected] 

Repair & Returns: Extension 210; E-mail: [email protected] 

Product specifications subject to change without notice 

For up-to-the-minute product information, visit our website: www.extech.com 

Extech Instruments Corporation, 285 Bear Hill Rd., Waltham, MA 02451

 

www.burntec.com

Содержание DM220
















Отзывы: