![background image](http://html1.mh-extra.com/html/extech-instruments/andes-3/andes-3_user-manual_2453639022.webp)
3.7.5 Magnetic Card Reader Control Commands (When MCR is installed)
Command String
Printer Action
ESC - ‘M’ - ‘nnm’ – Cr
Select MCR with (nn) auto timeout
Where nn=”00” to “99”
m=1: Reads track 1 only
m=2: Reads track 2 only
m=3: Reads track 3 only
m=4: Reads track 1 & 2
m=5: Reads track 2 & 3
m=6: Reads track 1, 2 & 3
ESC – ‘C’
Cancel MCR read process
3.7.6 Smart Card Reader Control Commands (when SCR is installed)
Command String
Printer Action
ESC - ‘M’ - ‘nn’ - ‘7’- Cr
Select SCR in direct mode with
Serial RS232.
(nn) is the auto timeout of the SCR.
ESC - ‘M’ - ‘nn’ - ‘8’- Cr
Select SCR in PassThru mode with
BT/802.11 or IrDA on.
(nn) is the auto timeout of the SCR.
3.7.7 Graphic Logo and Bar Code Commands
Command String
Printer Action
ESC – L – G –n
Prepare printer to load image:
ESC – G - 0x0FF
Loading Logo Complete:
ESC – L – g – n
Print stored logo image:
ESC - 'z' - n1 – n2 – L - [data]
Print Bar Code without visible text
ESC - 'Z' - n1 – n2 – L - [data]
Print Bar Code with visible text
ESC - ‘Q’ - ‘J’ – n
Reverse Dot Feed
ESC - ‘Q’ - ‘Q’ – n
Set Out of Paper Sensitivity
ESC - ‘Q’ - ‘F’ – m
Set Forward Black Mark Seek
ESC - ‘Q’ - ‘B’ – m
Reverse Black Mark Seek
ANDES3 User’s Guide
Rev 1.0
22