TABLE 3 – ANDES 3 - Serial RS232C Interface signals
3.4 Infrared Communications Mode (IrDA)
Dip Switch #1 must be in the <ON> position.
The printer can be powered up by pressing the power <On/Off> switch
If no IrDA connection is made, the printer will automatically power down to a lower
power level to conserve battery life. It will remain in a “sleep” mode until an IrDA
connection is made, at which time the printer will “wake” up and print the requested
data
Pressing the power switch again will turn the printer <OFF>.
3.5 Bluetooth/802.11b Communications (Option)
Bluetooth operation: Dip Switch #1 must be in the <OFF> position.
Dip Switch # 2 must be in the <ON> position.
802.11b operation: Dip Switch #1 and #2 must be in the <ON> position.
Note: Adjust baud rate settings to match those of the BT or 802.11b module in your
computing device
The printer can be powered up by pressing the power <On/Off> switch
Pressing the power <On/Off> switch again will turn the printer <OFF>.
Note: It is necessary for the mobile computing device you are using to discover the printer.
Refer to the instructions provided by the systems integrator.
Note: Systems Integrators: Refer to the Bluetooth manual provided with your mobile
computer and the Bluetooth section of the Developer’s Manual/802.11b Application Note
available for this printer.
ANDES3 User’s Guide
Rev 1.0
18