Instruction listed in
Section 4.1
.
Red (Error) LED on
Check that paper roll is not out and paper door is
closed.
Error reading MCR.
After extended printing, print head may be hot;
printer will pause before resuming printing.
If the problem is not identified by following the above trouble shooting guide, contact Extech
Technical Support. Support numbers and Email addresses are listed at
Section 6
of this
manual.
Other than routine cleaning and other maintenance described in Section 4, the
printer is not intended to be serviced by the user. It must be returned to an
Authorized Service Center. Under no circumstances should the user attempt to
take the printer apart
ANDES3 User’s Guide
Rev 1.0
27
