Model 42525A Version 4.0 5/05
8
Support line (781) 890-7440
Technical support: Extension 200; E-mail: [email protected]
Repair & Returns: Extension 210; E-mail: [email protected]
Product specifications subject to change without notice
For the latest version of this User’s Guide, Software updates, and other
up-to-the-minute product information, visit our website: www.extech.com
Maintenance
Battery Replacement
When the low battery symbol appears on the LCD, replace the meter’s 9V battery. The
battery compartment is located on the bottom of the meter's handle. Open the
compartment by sliding the battery compartment cover off. Replace battery and re-install
the battery compartment cover.
Cleaning
Wipe meter with a damp cloth when necessary. A mild detergent may be used but avoid
solvents, abrasives, and harsh cleansers. Do not allow moisture inside the meter.
Storage
Remove the battery if the meter is to be stored for long periods. Do not store the meter in
an environment that exceeds the published operating temperature and humidity
specifications.
Calibration and Repair Services
Extech offers complete repair and calibration services for most products we sell. For
periodic calibration, NIST certification or repair of most Extech products, call customer
service for details. Extech recommends that calibration be performed on an annual basis to
insure calibration integrity.
Copyright
©
2005 Extech Instruments Corporation
All rights reserved including the right of reproduction in whole or in part in any form
