OK
H
M
L
HEAT
TIMES
PRESS TO ALTER YOUR HEATING TIMES
PRESS TO DEACTIVATE HEATING, OR HOLD
FOR 5 SECONDS FOR MANUAL OVERRIDE
PRESS FOR 1 HOUR OF HIGH TEMPERATURE
PRESS TO ALTER YOUR “HIGH” TEMPERATURE
PRESS BOTH TOGETHER TO SET/VIEW CLOCK
PRESS TO ALTER YOUR “MID” TEMPERATURE
PRESS TO ALTER YOUR “LOW” TEMPERATURE
OFF
MAN
1 Hr
High Setting
Current
Temp
0
2
4
6
8 10 12 14 16 18 20 22 24
+
PRESS HERE
MPRT MS
PROGRAMMABLE ROOM THERMOSTAT
The MPRT MS is a programmable room thermostat. It senses the
room temperature and if heat is called for, it activates the heating.
WIRING THE MPRT MS.
The MPRT MS is wired directly to the
heating equipment and powered
directly from the main voltage supply.
MPRT MS
INSTALLATION INSTRUCTION
LOCATING THE ROOM UNIT
The MPRT MS is mounted using the two screws provided.
WHEREVER the Room Unit is mounted/used it should be out of
direct sunlight, out of draughts, and clear of any heat source (e.g.
radiators, fires or electronic equipment). For optimum use the unit
should be sited between 1 and 1.5metres from the floor.
OK
H
M
L
HEAT
TIMES
PRESS TO ALTER YOUR HEATING TIMES
PRESS TO DEACTIVATE HEATING, OR HOLD
FOR 5 SECONDS FOR MANUAL OVERRIDE
PRESS FOR 1 HOUR OF HIGH TEMPERATURE
PRESS TO ALTER YOUR “HIGH” TEMPERATURE
PRESS BOTH TOGETHER TO SET/VIEW CLOCK
PRESS TO ALTER YOUR “MID” TEMPERATURE
PRESS TO ALTER YOUR “LOW” TEMPERATURE
OFF
MAN
1 Hr
High Setting
Current
Temp
0
2
4
6
8 10 12 14 16 18 20 22 24
OK
H
M
L
HEAT
TIMES
PRESS TO ALTER YOUR HEATING TIMES
PRESS TO DEACTIVATE HEATING, OR HOLD
FOR 5 SECONDS FOR MANUAL OVERRIDE
PRESS FOR 1 HOUR OF HIGH TEMPERATURE
PRESS TO ALTER YOUR “HIGH” TEMPERATURE
PRESS BOTH TOGETHER TO SET/VIEW CLOCK
PRESS TO ALTER YOUR “MID” TEMPERATURE
PRESS TO ALTER YOUR “LOW” TEMPERATURE
OFF
MAN
1 Hr
High Setting
Current
Temp
0
2
4
6
8 10 12 14 16 18 20 22 24
(1.0 - 1.5) m
Release the MPRT MS from its
base by pressing at the arrow.
STEP 1.
Remove terminal covers by removing terminal screws.
STEP 2.
Thread control and power input wires through the knock-outs and
attach base plate to the wall.
STEP 3.
Connect control wires to terminals 2 and 3.
Connect power input wires to terminals 4 and 6.
PRECAUTIONS AGAINST ELECTRIC
SHOCK HAZARD.
Disconnect mains supply before moving cover.
Installation and maintenance must be carried out by suitably
qualified personnel and in accordance with current IEE wiring
regulations.
Do not mount to unearthed metal or metalised surfaces.
Fixed wiring installation must be employed. A class ’A’ switch,
(having contact seperation of at least 3mm in all poles) must be
incorporated in the fixed wiring as a means of disconnecting the
supply. Use a fuse rated at least 3 amps to protect the system.
1 2 3
To heating
equipment
c
WIRING THE MPRT
To heating
equipment
MPRT Back Cover
1
2
3
The MPRT is wired directly to the
heating equipment.
To heating
equipment
1
5
1
2
3
5
4
6
1
2
3
0
C
Power input
230 V
AC 50Hz
Live
Neutral
4
5
6
1 2 3
To heating
equipment
c
WIRING THE MPRT
To heating
equipment
MPRT Back Cover
1
2
3
The MPRT is wired directly to the
heating equipment.
To heating
equipment
1
5
1
2
3
5
4
6
1
2
3
0
C
Power input
230 V
AC 50Hz
Live
Neutral
4
5
6
1 2 3
To heating
equipment
c
WIRING THE MPRT
To heating
equipment
MPRT Back Cover
1
2
3
The MPRT is wired directly to the
heating equipment.
To heating
equipment
1
5
1
2
3
5
4
6
1
2
3
0
C
Power input
230 V
AC 50Hz
Live
Neutral
4
5
6
