1
Instruction Manual for Bimetal Thermometers
Thank you for purchasing Bimetal Thermometer.
- This product is designed to measure temperature. Do not use it for other purposes.
- Read this manual thoroughly before using the bimetal thermometer. Keep the manual in
a safe place for future references whenever necessary.
Measurements
1. Remove the packing materials.
2. Confirm that the bimetal thermometer has been produced with your ordered
specifications on measuring range, stem length, standard of the screw and etc.
3. Check the temperature readings in a normal ambient
4. Remove the mounting screw and install it at the place to install thermometer. Be sure
to tighten the screw.
5. Confirm that the packing ring is in between fixing nut and mounting screw. Otherwise,
object measured may leak out.
6. Insert the sensing stem into the object measured and tighten it with the fixing nut.
Name of Section (ex.: Model BM-T-90S)
No. Parts name
Materials
1
Lid
SUS304
2
Case
SUS304
3
Fixing nut
SUS304
4
Mounting screw
SUS304
5
Sensing stem
SUS304
6
Packing ring
NA Joint
7
Sensing element
Bimetal
Mounting screw
Packing ring
Fixing nut
Well (at option)
