background image

Model 42525A Version 4.0   5/05 

Introduction 

Congratulations on your purchase of Extech’s 42525A IR Thermometer. The Model 
42525A provides non-contact (IR) and contact (type K) temperature measurement 
capability. The built-in laser pointer (activated by pressing the meter’s trigger) increases 
target accuracy. The Model 42525A has an RS-232 PC Interface jack for recording 
readings as they are taken. Professional features include EMISSIVITY ADJUST, 
RELATIVE MODE, DATA HOLD, DISPLAY OFFSET, and MIN MAX DISPLAY. Proper 
use and care of this meter will provide years of reliable service. 
 
 

Safety 

1.  Use extreme caution when the laser beam is ON 

2.  Do not point the beam toward anyone's eye 

3.  Be careful not to let the beam strike the eye from a reflective surface 

4.  Do not use the laser near explosive gases or in other potentially explosive areas

 

 

 

 

 

 

 

 

 

 

Warranty 

EXTECH INSTRUMENTS CORPORATION

 warrants this instrument to be free of defects in parts and 

workmanship for 

one year

 from date of shipment (a six month limited warranty applies to sensors and cables). 

If it should become necessary to return the instrument for service during or beyond the warranty period, 
contact the Customer Service Department at (781) 890-7440 ext. 210 for authorization or visit our website 
www.extech.com for contact information. A Return Authorization (RA) number must be issued before any 
product is returned to Extech. The sender is responsible for shipping charges, freight, insurance and proper 
packaging to prevent damage in transit. This warranty does not apply to defects resulting from action of the 
user such as misuse, improper wiring, operation outside of specification, improper maintenance or repair, or 
unauthorized modification. Extech specifically disclaims any implied warranties or merchantability or fitness for 
a specific purpose and will not be liable for any direct, indirect, incidental or consequential damages. Extech's 
total liability is limited to repair or replacement of the product. The warranty set forth above is inclusive and no 
other warranty, whether written or oral, is expressed or implied. 

 

Содержание 42525A









Отзывы: