Extech Instruments 381395 Скачать руководство пользователя

Страница: 9 / 67

1. General Information

Model 381395 Version 1.0 January 2008

1-4

1.5. Safety Information: Read First

Warning!

Please read the following safety information before using the product. To avoid possible
electric shock or personal injury, please read and follow these guidelines carefully:

Follow the guidelines in this manual and DO NOT use the Meter if the case is damaged

Do not apply excessive voltage to the Multimeter. Apply voltage within the rated range

only

Use caution when measuring voltages above 30V RMS, 42V peak, or 60V DC. These

voltages pose an electric shock hazard

When using the probes always keep fingers behind the finger guards

Always connect the common test leads (black) before connecting the live test leads (red),

and disconnect the live test leads (red) before disconnecting the common test leads
(black)

Disconnect circuit power and discharge all high-voltage capacitors before testing

resistance and continuity

Only qualified personnel should open the meter case

When replacing fuses, use only the specified type and rating

Do not try to operate the Meter if it is damaged. Disconnect the power from the equipment

and connect the point of purchase for return and repair information

1.6. Symbols

and

Terms

See explanation in manual before using this Meter. This symbol indicates hazards that

may cause damage to the instrument or may result in personal injury

This symbol indicates high voltage may be present. Use extra caution

Double Insulation (Protection Class II)

Recycling information

Equal potential inputs
High BNC Input

Earth (ground) terminal.

AC or DC
DC – Direct Current

AC – Alternating Current
Fuse

This product complies with the essential requirements or the applicable European laws

or directives with respect to safety, health, environment and consumer protections

Содержание 381395




































































Результаты поиска

Содержание 381395

Отзывы:

Похожие инструкции для 381395

Бренды по названию

Популярные бренды

Extech Instruments 381395, Руководство пользователя

Результаты поиска

Содержание 381395

Отзывы:

Похожие инструкции для 381395

Бренды по названию

Популярные бренды