2. Product Description
Model 381395 Version 1.0 January 2008
2-13
c
Æ
COMPARE MODE
Æ
d
Press
to open Setup
e
Press
to change Edit
mode
PATH:
Æ
Æ
Selects “COMPARE MODE”
Æ
(1)
Display of the Date and Time (Data Logger and DMM Function)
c
Refer to Data Logger section.
(2)
Primary Numerical Field (Data Logger and DMM Function)
d
This field compares the input value to a high and low limit value. A LO is displayed if the
input value is lower than the low limit, PASS if the input value is within the high and low limit
values and HI if the input is greater than the high limit.
(3)
Display of the Comparison data and time.
e
-1.
: To be set value for HI limit.
e
-2.
: To be set value for LOW limit
e
-3.
: Reading value
e
-4.
: Total pass muster
e
-5.
: Total elapsed time
(4)
The Command Menu for Relative mode
f
Refer to Record mode.
(5)
The Setup mode for the Compare function
g
-1.
: Set the Measurement Function.
Select from the following functions. DCV, ACV, OHM, BZ, FRQ, RPM, P/W or DTY.
g
-2. Edit Compare mode high point.
g
-3. Edit Compare mode low point.
1
4
3
2
5
