3. Using the Scope
Model 381395 Version 1.0 January 2008
3-9
3.7.6. Making a single acquisition
To capture single events, perform a single shot. (One time screen update.) To configure the
Meter for a single shot on the Channel A waveform:
Connect the probe to the signal to be measured.
b
Default command menu.
c
Open the Trigger command menu.
d
Highlight Singl (SINGLE SHOT).
The meter performs a single shot. (One time screen update)
e
Return to normal Trigger mode.
PATH:
Î
Î
3.8. Storing and Recalling Screens
The meter can store setups and waveforms for later recall. Sixteen (0-15) setup and
waveform memories are available.
3.8.1. Storing Screen
To store a screen, perform the following:
b
Default command menu.
c
Open the Memory (MEM)
menu.
c
Memory Menu
(Store, Recall, Exit)
d
Memory Address (0~15)
(M: 00)
d
Memory field (M:00) appears at the top-right corner of the display area.
Select the memory address where the screen is to be stored.
e
Store the actual screen
PATH:
Î
Î
2
1
