Halytech microSpider2 Environmental, Быстрый старт

Страница: 1 / 12

microSpider2 Environmental
Quick Start Guide
This guide is not a replacement for the User Manual. Please refer to the complete
microSpider2 manual available from our website:
www.halytech.com.au
Once on the website, go to Products

Data Loggers

microSpider, and at the
bottom of the page select the ‘Downloads’ tab. From there you will be able to download
the manual to suit your microSpider2 software version.
Parts List (included in the box)

1 x microSpider2 bottom assembly (electronics and metal protector bar)

1 x microSpider2 top assembly (batteries and antenna)

Set of 4 screws & nuts

1 x greased rubber O-ring

1 x IO connector (8-pin)

2 x connector sealing caps

1 x Quick Start Guide (this document)
NOTE: A new microSpider2 is shipped without a SIM card and with the main battery
disconnected from the circuit.
Tools/Parts Required for Installation (purchased separately)

3mm Hex head screw driver

External aerial (External Aerial units only)

LanLink Comms cable (required for initial setup only)

Extra IO connector