Exodraft Xzense, Инструкция по эксплуатации

Страница: 44 / 52

44
3111001 Xzense UK 20190731
Purchase of accessories
4.3. Add device/pairing devices
1. To add a device (XTP sensor) to the control panel, select the
Add device menu on the display.
Add device
2. Already paired devices are displayed screen with a trash can.
To pair with a new device, select a device with a link on it. Here,
select the device XTP sensor.
XTP-sensor
3. A dialog box appears and confirms that the pairing has been
done correctly. Always make sure you have both power control
panel and XTP sensor during pairing.
Enhederne er nu parret.
OK
4. To run with the XTP sensor’s system control, this must be
selected below the System management menu, located under the
Setup menu.
System management
5. Change system mangement from Manual use to Pressure con-
trolled use by activating the ON function.
Pressure controlled
4.4. Technical data
Responsibilities:
5 Pa - 150 Pa +/- 0,1% Full scale
Dimension (h x b x d):
75 mm x 85 mm x 25 mm
Weight:
120 g
Ingress protection:
IP20
Material:
Box: Black ABS - Lid: Black PC
Ambient temperature:
-25
o
C - +50
o
C
Storage temperature:
-25 o C - +50 o C
Input, supply:
5 VDC - USB
Permitted overpressure:
20000 Pa
Media: Air and flue gases