Exodraft Xzense, Инструкция по эксплуатации

Страница: 10 / 52

10
3111001 Xzense UK 20190731
Product information
2.3. Generally add/delete devices
Add devices
Step Action Display
1
To add a device (Power Unit, repeater, etc.), select the Add
Device menu.
KOMMUNIKATION
Signalastyrke Tilføj enhed Nulstil netværk Devices Signal test Reset network
SIGNAL
2
Already paired devices are displayed on the screen with a
trash can beside.
To pair with a new device, select a device with a link beside.
Power Unit
Repeater
Tilføj enhed
Power Unit (F1EE)
Repeater
UNITS
3
If the desired device you want to pair with is not available,
you can add the device via. code-pairing.
Select the Add Device feature
+
.
Power Unit
Repeater
Tilføj enhed
Power Unit (F1EE)
Repeater
UNITS
4
If you want to pair with a Power Unit, you must
enter the correct code from the pairing code card that
came with the Power Unit.
Use the arrows to navigate the numbers and use the plus
and minus icons to increase or decrease the value of the
number. Finish with OK.
INDTAST KODE
29 54
OK
PIN CODE
5
The code consists of four characters.
Number from 0-9 and/or letters from A-F.*
*The password illustrated to the right is just an example.