Exodraft Xzense, Инструкция по эксплуатации

Страница: 19 / 52

3111001 Xzense UK 20190731
19
Product information
2.8. Lighting and operation
Step Action Display
1 Select
Lighting
Lightning Ventilation Weather
2
The display shows a lighting, and the fireplace/stove
must now be turned on.
The chimney fan will run at maximum speed for 10
minutes (default setting) and then fall to the speed it
was driving when it was last turned on.
The Boost period and speed can be changed in the
Setup menu.
10 min
BOOSTING
3
Turn on while the chimney fan is running at maximum
speed.
If the temperature sensor is activated and you forget
to turn on the chimney before turning on, the chim-
ney fan will automatically start when the temperature
at the top of the chimney has reached the start tem-
perature setting. The factory setting is 40
o C.
Note: We recommend that the chimney fan be
switched on manually every time! At the same time
you avoid soot and ach to escape the fireplace/
stove during lighting.
10 min
BOOSTING
4
After the boost period, it switches on in operation
mode.
To increase or decrease the chimney speed and hence
the chimney draft, the up and down buttons are used.
The display shows the new setting.
Skorsten
55 C
DRIFT
30 %
OPERATION
Chimney
5
The display automatically goes into sleep mode and
the backlight goes out after a short time. Press the
button on the top of the unit to turn the display back
on.