36
| Tritex
®
TTX Series DC Actuator Installation & Maintenance Instructions
Curtiss-Wright | Rev D | PN75667 | 8/1/22
10.0 PRODUCT RETURNS
Procedure to return products for repair or replacement:
1. Before requesting an RGA number, please contact Exlar
Technical Support to see if it is possible to resolve the issue
prior to return.
2. If it is determined that an RGA number is required, please
do so by completing an online RGA request form found
on the Exlar website. For international repairs, closely
follow instructions provided by the Exlar Returned Goods
Administrator. Failure to comply with issued instructions
may result in delays for repair and return.
11.0 CERTIFICATIONS
NOTE:
Tritex TTX Series actuators that are intended as
components in a third-party machine in which the enclosure
and assembly will affect the EMC emissions, are covered by
the EMC standard that relates to the final product.
Per EU directives implemented on April 20th, 2016, the following
procedures must be followed by importers and distributors.
IMPORTER REQUIREMENTS
• Importers shall indicate their name, registered trade name
or registered trademark, and the postal address at which
they can be contacted on the apparatus (unless that is
not possible, in which case it should be included on the
packaging or in an accompanying document).
• Importers shall ensure that the product is accompanied by
instructions and safety information in a language which can
be easily understood by end-users, as determined by the
Member State concerned.
• Importer is to translate the EU declaration of conformity
into the languages required by the member state(s), where
the product is sold. Importers shall keep a copy of the EU
declaration of conformity for 10 years.
• Importers shall provide a reasoned request from a competent
national authority and provide it with all the information and
documentation in paper or electronic form necessary to
demonstrate the conformity of a product in a language which
can be easily understood by that authority.
• Importers shall ensure that, while apparatus is under their
responsibility, its storage or transport conditions do not
jeopardize its compliance with the safety objectives.
• Importer shall take corrective action necessary when they
consider or have reason to believe that the product is not in
conformity with its directive(s).
DISTRIBUTOR REQUIREMENTS
• Distributors shall indicate their name, registered trade
name or registered trademark and the postal address at
which they can be contacted on the apparatus (unless that
is not possible, in which case it should be included on the
packaging or in an accompanying document).
• Distributor shall ensure that apparatus is accompanied
by instructions and safety information in an appropriate
language. Distributor shall translate the EU declaration
of conformity into the languages required by the member
state(s), where the product is sold. Distributors shall keep a
copy of the EU declaration of conformity for 10 years.
• Distributor shall ensure that, while apparatus is under their
responsibility, its storage or transport conditions do not
jeopardize its compliance with the safety objectives.
• Distributor shall take corrective action necessary when they
consider or have reason to believe that the product is not in
conformity with its directive(s).
