EXIT Toys Triker Rocker, Руководство пользователя

Страница: 4 / 58

4.0 Guidelines for safe use
• Before using your Triker
®
product, please check that it is in good wor-
king order, that all bolts and screws are tight and that tyre pressure is
as it should be. Please also check the brakes.
• Children using a Triker
®
product should always be supervised by an
adult.
• Triker
®
products are not allowed on the public road, only on the pave-
ment and private grounds. Your Triker
®
product is not approved for on
the road use. Adapt your speed always according to the prevailing
conditions. Riding down a slope (at an angle,) the Triker
®
products
could topple. Riding downhill will build up a high speed, so please
take note of a longer braking distance. The advice is not to take your
Triker
®
products downhill.
When the tyre pressure is too low the chances of a flat tyre increase
and the tyre wears out quicker. When the tyre pressure is too high the
tyre could become detached from the valve. This could lead to dan-
gerous situations. (please note tyre pressures increases in bright sun-
light and high temperatures!) Tyres should not touch oil, grease or fuel.
Ensure that the valve-caps are always fitted on the valve.
3.3 Rubber mountings
• The two rubber mountings in between the frame of Viper, Rocker and
Triker should be checked regularly for any damage, small cracks etc.
Should you notice any cracks, please replace the rubber mounting.
The rubber can be disposed of with normal waste. Visit our website
for details of how to order new rubbers.
3.4 Drive chain
• On Rocker and Triker, the chain is made of steel and should be grea-
sed regularly for smooth running, we recommend the Teflon
®
spray. If
the chain is tightened too much, the Triker
®
products will be difficult to
ride, and could crack the axle. If the chain is not tight enough it could
come off the gearwheel and damage the chain-cover. The chain ten-
sion can be adjusted by turning the chain-adjusters attached to both
sides of the front-axle.
3.5 Miscellaneous
• Please check your Triker
®
product regularly for possible wear and tear.
To ensure the original high safety standard remains intact, please
replce any worn parts immediately. Your Triker
®
product should not be
used, whilst being repaired. Spare-parts can be obtained from your
Triker
®
dealer.
For assembly instructions see the back of this manual.