Exhausto EXcon, Оригинальное руководство пользователя

Страница: 26 / 52

Service menu
Fan Description
Forced control of supply air fan and setting K fac-
tor.
Forced operation is only possible once the unit has
startet.
● Set the forced control setpoint [%]
● Setting of remaining time until forced control ex-
pires [hh:mm:ss]
● Activate forced control: On/Off
● Current rpm [RPM]
● Current ventilation [m3/h] [l/s] [Pa]
● Setting of k-factor
Symbol is shown when an alarm from the frequency
converter is triggered.
Setting of delayed fan start
● Supply air fan delay [sec]
Starts x secs after extract air fan
● Extract air fan delay [sec]
Starts y sec. after start of damper opening.
Set temperature regulation
● P-band cooling [°C]
● P-band heating [°C]
● Shows current temperature [°C]
● Correction value [°C]
Set regulation parameters for input
● I-time airflow [sec]
● I-time cooling [sec]
● I-time heat recovery [sec]
● I-time heating 1 [sec]
● I-time combi[sec]
Set regulation parameters for input
● I-time heating 2 [sec]
● I-time heat pump [sec]
Set temperature regulation for exit air
● P-band cooling [°C]
● P-band heating [°C]
● Shows current temperature [°C]
● Correction value [°C]
Set regulation parameters for exit air
● I-time airflow [sec]
● I-time cooling [sec]
● I-time heat recovery [sec]
● I-time heating 1 [sec]
● I-time combi [sec]
3005858-2017-09-28
Service level
26/52