EXFO XTM-50 O-band, Руководство пользователя

Страница: 17 / 68

Installing and Connecting the XTA-50
XTA-50 User Guide 17
2.3 Connecting an Optical Source to the XTA-50
Subject
Procedure • Remove the protective cap from the IN and OUT connectors and connect the
appropriate jumper corresponding to the connector type mounted on your product,
as indicated next to the connectors (see Figure 2, p. 13 ).
Caution
• Make sure you use the appropriate connector type, corresponding to the
one mounted on your XTA-50 (see section
Technical Specifications, p. 9
for available models).
• Make sure optical connectors are perfectly clean. It is essential to
achieve optimum system performance (see section
Cleaning Optical
Connectors, p. 58 ).
• To prevent premature failure of the XTA-50 optical connectors due to
frequent connections, always keep a fiber-optic jumper cable connected
to the XTA-50 optical port while you use the jumper's free end to connect
to other devices.
Important
Keep protective caps on optical connectors when not in use.