EXFO IQS-600 Series, Руководство пользователя

Страница: 65 / 379

Getting Started with Your Integrated Qualification System
Integrated Qualification System
57
Installing EXFO LabVIEW Drivers
To install the LabVIEW software:
1.
Insert the LabVIEW CD in the CD-ROM drive of your unit or computer.
2. The installation process should start automatically. If not, or if you have
downloaded the files from the National Instruments Web site, start it
manually as follows:
2a.
Open the File Explorer ( icon in the taskbar under Windows
8.1 Pro).
Note: To access the File Explorer on your unit, from the front panel, press the
button to show the taskbar (IQS-605P units). From the lower left corner of
the screen, click the
Start button ( ),and then click the File Explorer
tile.
2b.
Locate the autorun.exe file, then double-click on it to start the
installation procedure and follow the on-screen instructions.
You should keep the default names and paths suggested by the
installation program.
3. Once the software installation is complete, install the patches available
for your LabVIEW version.
If the patches are not included on your LabVIEW CD, you may
download them from National Instruments’ Web site at
www.ni.com
.
3a. Open the File Explorer ( icon in the taskbar under Windows
8.1 Pro).
Note:
To access the File Explorer on your unit, from the front panel, press the
button to show the taskbar (IQS-605P units). From the lower left corner of
the screen, click the
Start button ( ),and then click the File Explorer
tile.
3b. Locate the Updates\setup.exe file, then double-click on it to start
the installation procedure, and follow the on-screen instructions.