EXFO IQS-600 Series, Руководство пользователя

Страница: 204 / 379

Using IQS Products in an Automated Test Environment
196
IQS-600
Working with EXFO LabVIEW Drivers
The following table presents the possible settings for communication
parameters. These parameters must be set from LabVIEW for each
instrument.
Note:
If you have modified the identification number of your IQS controller unit,
use this number to form the IQS slot number. For example, for a controller
unit configured as “999”, the IQS slot number will correspond to 999,
immediately followed by the number of the slot (0 to 9) where the
instrument has been inserted.
Note: When you are working with platform or IEEE 488.2 commands, you can
leave the slot number at its current value.
Parameter
Active X
(local)
Active X
(remote)
RS-232
(remote)
GPIB
(remote)
Communication
type
ActiveX ActiveX RS232 GPIB
VISA resource
name
N/A N/A Select the serial
port from the list
Select the GPIB
device from the
list
IQS slot number Concatenation
of the IQS
controller or
expansion unit
number and the
instrument’s slot
number
Concatenation
of the IQS
controller or
expansion unit
number and the
instrument’s slot
number
Concatenation
of the IQS
controller or
expansion unit
number and the
instrument’s slot
number
Concatenation
of the IQS
controller or
expansion unit
number and the
instrument’s slot
number
Machine name localhost Ethernet
address, that is
IP address or
machine name
of your IQS
controller unit
N/A N/A