manualshive.com logo in svg

EXFO IQS-1700, Руководство пользователя, Страница: 20 / 204

Поделиться
Скачать
EXFO IQS-1700 Скачать руководство пользователя страница 20

Getting Started with Your High Performance Power Meter

12

IQS-1700

Inserting and Removing Test Modules

The module is correctly inserted when its front panel is flush with the front 
panel of the controller or expansion unit.

When you turn on the controller unit, the startup sequence will 
automatically detect your module.

Note:

You can insert IQ modules into your controller or expansion unit; the 
IQS Manager software will recognize them. However, the IQS-1700 locking 
mechanism (retaining screw) will not work for IQ modules.

To remove a module from your controller or expansion unit:
1.

While pulling gently on the knob, turn it counterclockwise until it stops.

The module will slowly be released from the slot.

2.

Place your fingers underneath the module or hold it by the retaining 
screw knob 

(NOT by the connector)

 and pull it out.

Retaining screw knob

Содержание IQS-1700













































































































































































































Отзывы:

Нет отзывов