EXFO IQS-1700 Скачать руководство пользователя страница 109 | Manualshive

Страница: 109 / 204

EXFO IQS-1700 Скачать руководство пользователя страница 109

High Performance Power Meter

101

13 Warranty

General Information

EXFO Inc. (EXFO) warrants this equipment against defects in material and
workmanship for a period of two years from the date of original shipment.
EXFO also warrants that this equipment will meet applicable specifications
under normal use.

During the warranty period, EXFO will, at its discretion, repair, replace,
or issue credit for any defective product, as well as verify and adjust the
product free of charge should the equipment need to be repaired or if the
original calibration is erroneous. If the equipment is sent back for
verification of calibration during the warranty period and found to meet all
published specifications, EXFO will charge standard calibration fees.

THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES EXPRESSED,
IMPLIED, OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE. IN NO EVENT SHALL EXFO BE LIABLE FOR
SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES.

Liability

EXFO shall not be liable for damages resulting from the use of the product,
nor shall be responsible for any failure in the performance of other items to
which the product is connected or the operation of any system of which
the product may be a part.

EXFO shall not be liable for damages resulting from improper usage or
unauthorized modification of the product, its accompanying accessories
and software.

«
...
107
108
109
110
111
...
»

Содержание IQS-1700













































































































































































































Отзывы:

Нет отзывов