RME2-AI-IA3 Analog Variables Acquisition Module – User’s Manual
Exemys
www.exemys.com
Rev. 1
8
2.3
Analog inputs wiring
2.3.1.
Voltage input wiring (0-10V)
Sensors with voltage output (0-10V) can be connected to the device as shown in the
following image.
2.3.2.
Current input wiring(4-20mA)
In this case, sensors with current loop output (4-20mA) can be connected to the device as
shown in the following image.
The input impedance value of each track is 62Ω.
Do not exceed the signal limit for each case (10 V or 20 mA respectively).
Excessive signal level may cause abnormal operation or permanent damage to the device
