RME2-AI-IA3 Analog Variables Acquisition Module – User’s Manual
Exemys
www.exemys.com
Rev. 1
29
B. COMMAND CONSOLE
RME2-AI-IA3 can be set through a command console connecting the device to a serial port
on the PC.
To access the command console, you must connect the RME2-AI-IA3 to a RS232 port on a PC
and you must install an Exemys serial terminal program, called
Exemys Console.
Download the Exemys Console:
http://www.exemys.com/console
Once the serial terminal program is installed, connect the RME2-AI-IA3to a RS232 port on
the PC and execute the
Exemys Console
.
1.
Click on Connection -> Serial Port, it will open a window with name of all COM Serial
port. Select with double click the port where device is connected. Verify Baud rate in
the serial por is 9600.
2.
Turn on the RME2-AI-IA3 and in the first 7 seconds type CFG and press ENTER or
press the CFG button. RME2-AI-IA3 will display a welcome message on the
configuration command console.
