exemys RME2-AI, Руководство пользователя

Страница: 21 / 32

RME2-AI-IA3 Analog Variables Acquisition Module – User’s Manual Exemys
www.exemys.com Rev. 1 21
3. MONITORING
RME2-AI-IA3 shows the obtained values from each input in its web page, in the Monitoring
menu. Here you can observe the monitoring called "Administrator’s Monitor" where are the
alarms state, the analog, scaling and the A / D values input for each input.
This monitoring is protected by the password of the web page.
Device also has the "User’s Monitoring", in which are the variable named choose by the
user, the alarm status and finally the scaled values, only you can see inputs that were
selected to be displayed, in the section Configuration ->Inputs ->Monitoring.
3.1. Administrator’s Monitor
Analog Value: Value in milli Ampere or in Volt according to each of the inputs is configured.
In the range of 0-10 V or 4-20 mA.
Alarm Status: In this field the alarm status of the inputs is reflected; This field can obtain the
following values: Normal, High Value o Low Value
Scaling Value: In this field you see the value calculated according to the scaling
configuration.
Converter A / D value: Analog/Digital converter counts for each of the eight inputs (0 to 4000
for 0V to 10V or 0mA to 20mA).