RME1-TC User’s Manual - Thermocouple Acquisition Module
Exemys
The RME1-TC also includes the file crossdomain.xml. This a reading politics file that allows
reading the rme1-tc.xml from any domain in Action Script applications.
4.3 SNMP mode operation
4.3.1 Introduction
The RME1-TC supports the SNMP supervision protocol. The RME1-TC works as a SNMP agent,
this means that it answers queries under this protocol and it is also able to generate unsolicited
messages (Traps) for certain events / alarms notification.
In the configuration web page you can enable or disable this service.
With the SNMP service enabled, it is possible to enable or disable SNMP traps. The RME!-PT
allows to configure up to two IP manager addresses (IP addresses where SNMP traps are to be
sent) as a security redundancy method, and to configure the communities of read ,write and
traps.
It has to be clear that if you configure the same IP address in both IP manager address fields,
alarms will be doubled.
Parameters “Read community” and “Write community” are passwords to access to the
information of the device with read and write permission respectively. Parameter “Trap
community” is the password sent with each trap from the device.
Figure 23 - SNMP configuration
IMPORTANT
The passwords of the community can be up to 15 characters long.
www.exemys.com Rev.
1
Page
27
