RME1-TC User’s Manual - Thermocouple Acquisition Module
Exemys
Vin
+
GND
-
1
2
3
4
5
6
7
8
1
2
3
4
5
6
7
8
PowerSupply
10-30 Vdc
Figure 4 - Power connection diagram
2.3 RS-232 serial port connection (only for configuration)
The RME1-TC has one configuration serial port whose connection terminals are shown in the
picture below. The configuration serial port is available for all the RME1-TC models. The same
picture also shows where the Ethernet connector is placed.
Note: The configuration method through serial port is an alternative. The suggested method is
through the configuration WEB page.
RS232 Serial Ports
Terminal Blocks
RJ45 Connector
Ethernet Connector
Power Supply
1
2
3
4
5
6
7
8
Figure 5 - Serial and Ethernet connectors position
www.exemys.com Rev.
1
Page
10
