Excalibur AL-1850-EDPB Скачать руководство пользователя страница 9

9

Security System Features (cont’d)

AUTOmATiC REARminG

  This automatically rearms  the alarm if the system is disarmed from the remote. 

(see user feature #3). When disarmed by remote, the system will start a 90 second 

countdown (fast flashing status light) to arm the system. This is useful if the controller 

may accidentally disarms the system when it’s kept in a purse or pocket where other 

items could potentially press the buttons  EnhAnCED AUTO REARM allows you to 

cancel the countdown by pressing UNLOCK a second time within 5 seconds of the 

first press to disarm the alarm.

WhEn ThE SySTEm TRiGGERS

  If the system were to be compromised while armed, it will trigger sounding the 

siren/horn and flashing the parking lights for 30 seconds (programmable). At this point 

you will also be notified on the controller as to which zone is violated (if in range of the 

system). When disarming the system after a trigger event, the siren/horn will chirp 4 

times and the parking lights will flash 4 times instead of the standard 2 times.

LOCK On TRiGGER:

 If a door is opened when the system is triggered, it will wait 

until the door is closed again, then lock the doors. This patented feature is useful to 

further deny a thief of further access to the vehicle.

STORm SAFE mODE:

 When the system is triggered, pressing the “UnLOCK” button 

will stop the alarm from sounding but will leave the doors locked. This function is use

-

ful if you have a false triggering situation due to violent weather.

ZOnE ViOLATiOn RECALL:

 The system is capable of telling you which zones were 

triggered last. The system’s status light will flash to indicate which zone was triggered. 

This occurs during the alarm cycle AND after disarming. The system will store the last 

triggered zone until the vehicle’s ignition key is turned on. See “The Status Light” sec

-

tion of this manual for further explanation of this feature.

nUiSAnCE PREVEnTiOn:

 If the system prewarns 5 times within 15 minutes, it will 

bypass the zone for the remainder of the 15 minutes before rearming the pre-warn 

zone. Additionally, if a full trigger zone is left open, the system will trigger a total of 3 

times before bypassing the zone. Once the zone is closed again, it will re-arm that 

zone.

PRE-WARn DETECTiOn

  This system’s impact sensor is designed, in addition to detecting a full impact, will 

warn away potential violators when it detects a light impact to the vehicle The system 

will respond by chirping the siren/horn 3 times and locking the doors This is very use-

ful when an intruder attempts to unlock the door with “slim jim” types of devices.

Using The Valet Switch

EmERGEnCy OVERRiDE

  If you were to lose or break your controller, you’d need to perform an emergency 

override to disarm the system and use your vehicle. To do so, use the following steps:

STEP 1 - 

Enter the vehicle (the alarm should sound)

STEP 2 - 

Turn the ignition key to the “On” position

STEP 3 - 

Press the valet switch (located in the window-mount antenna) once 

  NOTE: Enter your SecureCode at this time if programmed via user feature #1

STEP 4 - 

Turn the ignition “OFF”

Содержание AL-1850-EDPB

























Отзывы: