Excalibur AL-1850-EDPB, Руководство по эксплуатации

Страница: 22 / 24

22
installer Programmable Features (cont’d)
This device complies with FCC Rules part 15. Operation is subject to the following
two conditions, (1) This device may not cause harmful interference and, (2) This
device must accept any interference that may be received, including interference
that may cause undesired operation
The manufacturer is not responsible for any radio or TV interference caused by
unauthorized modifications to this equipment. Such modifications could void the
user’s authority to operate the equipment
Feature #12 Low Temp Crank Extender
0ms (Off) (press “ lock ” button to program)
200ms (press “ unlock ” button to program) - DEFAULT
300ms (press “ trunk ” button to program)
400ms (press “ start ” button to program)
When the vehicle’s interior temperature is below freezing, this feature adds extra crank time to the
base timing (see installer feature #7). It applies to tachless modes only (installer feature #6)
Feature #13 Data Port Protocol
ADS (iData) (press “ unlock ” button to program)
D2D (Trilogix) (press “ lock ” button to program) - DEFAULT
This feature determines which data protocol is used on both data ports. Choose this based on
the accessory being connected to the port nOTE: When a BLADE is inserted, this feature
automatically switches to the ADS protocol.
Feature #14 Lock On Prewarn
On (press “ lock ” button to program) - DEFAULT
Off (press “ unlock ” button to program)
By default, if the prewarn zone is triggered, the system will automatically lock the doors to combat
unauthorized entry from lock picking. If this causes conflict with OEM vehicle functions, you can
turn it off.
Feature #15 Blue Satellite Port, Blue Wire Function
Status (press “ lock ” button to program) - DEFAULT
Pulse Before Start
(press “
unlock
” button to program)
Pulse After Start (press “ trunk ” button to program)
Pulse After Engine Off (press “ start ” button to program)
This determines the function of the Blue wire on the Blue satellite relay port.
The Status setting turns on briefly before the Ignition output and stays on during remote start
mode The other settings give a 08 second pulse under the selected condition
Feature #16 Low Current / motorcycle mode
On (press “ lock ” button to program)
Off (press “ unlock ” button to program) - DEFAULT
This feature, when on, reduces the system’s current draw by as much as 40% to maximize the
vehicle’s battery life while the alarm is armed. It causes the starter interrupt output to only oper -
ate when the ignition is turned on and reduces the frequency of the “armed” flashing status light
significantly. This is ideal when the system is to be used on vehicles that have limited battery
capacity and/or may sit for extended periods without charging the battery.