Excalibur AL-1850-EDPB Скачать руководство пользователя страница 14

14

Anti-Carjacking Protection

  The system is equipped with two separate Anti-Carjacking protection features (igni

-

tion, open door, or both)  All are programmable, and must be turned on to operate  

Once activated, the user has 53 seconds to cancel the Anti-Carjacking protection 

process (described below).  If Anti-Carjacking is not cancelled, 53 seconds after being 

activated the siren will begin to chirp for 7 seconds to alert the user that the system 

is about to enter into an alarm condition  The Valet Switch may still be pressed once 

during this period to cancel the Anti-Carjacking process

  If the Anti-Carjacking process is not cancelled before the 60 second countdown 

expires, the system will enter an alarm condition, sounding the siren and flashing the 

parking lights.   30 seconds after this occurs, or should the ignition be turned off in the 

meantime, the stater interrupt will engage Once the system enters the alarm condi-

tion, it will not respond to the transmitter, nor will the system reset automatically after 

60 seconds, and it can only be disengaged by:

Step 1

  Turning the vehicle’s ignition off.

Step 2

  Turning the ignition back on

Step 3 

 Within 5 seconds, perform an Emergency Override using the Valet Switch.  If 

the SecureCode has been customized, the correct number of Valet Switch presses 

must be made  

The different types of Anti-Carjacking protection are:

ignition Activated Anti-Carjacking 

activates every time the vehicle’s ignition is 

turned on.  The Valet Switch must be pressed within 60 seconds of activating to can

-

cel Anti-Carjacking This is User Programmable Feature #15

Door Anti-Carjacking 

activates when a door is opened after the vehicle is started 

and the engine is running.  The Valet Switch must be pressed within 60 seconds after 

activation to cancel Anti-Carjacking This is User Programmable Feature #15

Содержание AL-1850-EDPB

























Отзывы: