Exalt Communications, Inc.
r-series
Installation and Management Manual
5000007 (ETSI)
48
2007-02-12 (draft)
¶
r-c Series only: The antenna port selection allows selection of either the A or B connector
on the front face of the radio housing. Only set this parameter if using a dual-polarized
antenna or two separate antennas.
¶
r-Series only: The antenna port selection toggles between the vertically and horizontally
polarized integrated antennas. Ensure that both link ends match polarization.
Changing antenna port will temporarily interrupt traffic.
The polarization of
the antennas at each end must match at each end – adjust the far-end radio first,
then the near-end radio.
•
Buzzer Timeout (minutes) parameter creates an audio signal for antenna alignment. Turn on
the buzzer continuously during antenna alignment or preset a period of time that the buzzer
will sound. If the buzzer stops before alignment activities are complete, change the selection
and press the Update button or select the ON option until alignment activities are complete.