Exalt Communications, Inc.
r-series
Installation and Management Manual
5000007 (ETSI)
35
2007-02-12 (draft)
•
Ctrl+\ (control and backslash keys) = exit session
The following depicts the complete tree structure:
1.
Radio information
2.
Configuration
a.
Current IP settings
b.
Current system configuration
c.
Set IP address and mask (admin only)
d.
Set IP default gateway (admin only)
e.
Administration (admin only)
–
System time and date
–
System reboot
–
Password
–
File transfer
–
File activation
3.
Status
¶
Alarm summary
¶
Radio alarm
¶
Radio status
¶
Radio performance
¶
Radio performance reset (admin only)
4.
Exit
Exalt Graphical User Interface (GUI)
The Exalt GUI is the primary user interface for configuring and troubleshooting the radio and
radio system. A computer or hand-held device with a conventional HTML browser and Ethernet
port is required. Microsoft Internet Explorer is the preferred browser. Netscape, Mozilla, and
Firefox are also supported.
Preparing to Connect
If the radios are new, both radios are preconfigured as Radio B, and have the same IP address.
The initial priority is to configure one radio to Radio A and assign different IP addresses, unique
to each radio.
There are two ways to change the IP address:
1.
Reset the radio to the critical default factory settings (see Radio Reset on page 16)