Exabyte VXA-2 AUTOPAK1X7, Руководство по эксплуатации продукта, Страница: 85 / 104

O
CTOBER
2002 E
XABYTE
VXA-2 A
UTO
P
AK1x7
A
UTOLOADER 77
R
EMOVING THE
A
UTOLOADER FROM A
R
ACK
10.
10. 10.
10. Insert the free end of the cross-brace into the remaining side support. The
shipping braces should be positioned as shown in Figure 7-6 .
11. 11. 11. 11. Reinstall the magazine as described on page 13 .
R
EMOVING THE
A
UTOLOADER FROM A
R
ACK
If the autoloader is installed in a rack, remove it as follows:
1.
1. 1.
1. Remove the screw securing the front of the autoloader to the rack (see
Figure 7-7 ).
2. 2. 2. 2. Slide the autoloader tray outward from the rack so that you can access the
underneath side of the tray.
Figure 7-6 Proper position of shipping braces
Figure 7-7 Removing the screw securing the autoloader to the rack