56
P
RODUCT
M
ANUAL
1010964
Chapter
5
M
AINTENANCE
2.
2.
2.
2.
In the example above,
nnnnn
is the current baud rate for the autoloader.
3.
3.
3.
3.
To change the autoloader’s baud rate, press
[ENTER]
. The following screen
appears:
4.
4.
4.
4.
Press
[ENTER]
. The following message flashes on the screen:
Select serial port baud rate for Auto Loader
Then, the following screen appears:
5.
5.
5.
5.
Press
[
3
]
or
[
4
]
until you see the baud rate that matches the baud rate set on
the host, and then press
[ENTER]
.
Accessing Console using HyperTerminal
Note:
These instructions assume you are using HyperTerminal. If desired, you
can use a different terminal emulation software package.
To access Console using HyperTerminal:
1.
1.
1.
1.
From your computer, launch HyperTerminal.
2.
2.
2.
2.
In HyperTerminal’s Connection Description screen, enter a name and
choose an icon for this communications session.
3.
3.
3.
3.
In HyperTerminal’s Connect To screen, choose the communications port you
are using from the Connect Using field. Click OK.
4.
4.
4.
4.
In the Properties screen, make sure the fields contain the following values,
then click OK.
!
Bits per second:
(baud rate of the autoloader)
!
Data bits:
8
!
Parity bits:
none
!
Stop bits:
1
!
Flow control:
none
!
B a u d R a t
n n n n n
B a u d ?
1 1 5 2 0 0
↕