Exabyte VXA-2 AUTOPAK1X7, Руководство по эксплуатации продукта, Страница: 20 / 104

12
P
RODUCT
M
ANUAL
1010964
Chapter 2 H
ARDWARE
I
NSTALLATION
P
REPARING AND
I
NSTALLING
C
ARTRIDGES
This section describes how to prepare cartridges and install them in the
autoloader.
1. 1. 1. 1. Verify that the write-protect switch on each cartridge is set correctly, as
shown in Figure 2-3 . You can use a ball-point pen or similar instrument to set
the write-protect switch.
2. 2. 2. 2. Remove the magazine as described on page 8 , if necessary.
3. 3. 3. 3. Place the magazine on its back with the cartridge slots facing up. Orient the
cartridges as shown in Figure 2-4 .
Figure 2-3 Setting the write-protect switch
Figure 2-4 Installing cartridges in the magazine
RE
C
SA
VE
SA
VE
REC
REC = Write-enabled
SAVE = Write-protected