O
CTOBER
2002
E
XABYTE
VXA-2 A
UTO
P
AK1x7
A
UTOLOADER
19
U
SING
THE
O
PERATOR
P
ANEL
U
SING
THE
O
PERATOR
K
EYS
Use the keys on the operator panel to perform the operations described in
U
SING
THE
M
ENUS
To access the Main Menu, press
[MENU]
. Then, press
[
3
]
or
[
4
]
repeatedly to loop
through the menus and return to where you started.
Menus with
!
are menus that have changeable options. Menus with
"
are
menus that only have viewable information. Press
[ENTER]
to view the options
or information available from the menu you want.
Table 3-1
Operator panel keys
Keys
Operations
[
3
]
[
4
]
Scrolls up or down through the menus or increases or
decreases option values.
[
1
] [
2
]
Shifts the screen arrow left or right one digit when changing
SCSI IDs, password, number of moves, and so on.
[REMOVE{{{MAG]
Requests motion to stop and releases the solenoid so you can
remove the magazine.
Note:
The robot parks in front of the drive. If you want to
access the drive, use the Park & Unlock command from the
Main Menu.
[ESCAPE]
Goes up one level from the current menu option, cancels
changes, and stops tests and demonstrations that were started
through the Command Menu or Demo Menu.
[ENTER]
Selects the menu (goes down one level) or confirms a
parameter change or selection.
[RESET]
Resets the autoloader (requires confirmation).
Note:
To reset the drive, power cycle the autoloader.
[MENU]
Goes directly to the top of the Main Menu (to the Security
Menu).
[STATUS]
Goes directly to the Status screen. The Status screen is the
default after a reset.