Exablox OneBlox 4312 Скачать руководство пользователя страница 36

Страница: 36 / 124

Understanding OneBlox and OneSystem

| Version 2.15.5 | page

HAPTER

5 : OneBlox 4312

OneBlox 4312 User Guide

5.10.2 - Control Panel LEDs

The control panel located on the front of the OneBlox has several LEDs. These LEDs provide you

with critical information related to different parts of OneBlox. This section explains what each LED

indicates when illuminated and any corrective action you may need to take.

5.10.2.1 - Power Fail

Indicates a power supply module has failed. The second power supply module will take the load

and keep OneBlox running but the failed module will need to be replaced. Refer to Chapter 6 for

details on replacing the power supply. This LED should be off when OneBlox is operating normally.

5.10.2.2 - Information LED

This LED will be blue when the UID function has been activated. When this LED flashes red, it

indicates a fan failure. When red continuously it indicates an overheat condition, which may be

caused by cables obstructing the airflow in OneBlox or the ambient room temperature being too

warm. Check the routing of the cables and make sure all fans are present and operating normally.

You should also check to make sure that the OneBlox covers are installed. Finally, verify that the

heatsinks are installed properly. This LED will remain flashing or on as long as the indicated

condition exists.

5.10.2.3 - NIC1

Indicates network activity on the LAN1 port when flashing.

5.10.2.4 - NIC2

Indicates network activity on the LAN2 port when flashing.

5.10.2.5 - HDD

This LED indicates hard drive activity when flashing.

Содержание OneBlox 4312





























































































































Результаты поиска

Содержание OneBlox 4312

Отзывы:

Exablox OneBlox 4312, Руководство пользователя, Страница: 36 / 124

Результаты поиска

Содержание OneBlox 4312

Отзывы: