Exablox OneBlox 4312, Руководство пользователя, Страница: 112 / 124

Understanding OneBlox and OneSystem
| Version 2.15.5 | page
112
C
HAPTER
6 : Common Tasks OneBlox 4312 User Guide
3.
To prevent unintentional actions, OneSystem requires the administrator to enter the password
as confirmation. After this is done, the OneBlox will be reformatted and reset to factory default.
NOTE:
All of the information on OneBlox will be erased. This is a permanent action and may not
be undone.
OneSystem will initiate the process that will erase all the information, return OneBlox to the
original factory settings, and then reboot OneBlox. If there is only a single OneBlox in the
environment, after rebooting, OneBlox will appear on the network as it did when it was initially
installed with a default Ring name (OneBlox-R-####) and will not be seen in OneSystem.
OneBlox may now be paired with a OneSystem account (see
“ How do I pair OneBlox 4312 using
the web console? ” on page 29 and “ Associating OneBlox 3308 with OneSystem — Pairing Your
OneBlox ” on page 51).
NOTE:
If there are more than one OneBlox and auto-enrollment is enabled, when the OneBlox that
is being reset to factory defaults reboots, it will auto enroll with the existing Ring in the
environment. To alter this behavior, see “ How are the Settings for the OneBlox Ring
Changed? ” on page 93.
6.42 - How do I see what the deduplication ratio is for the OneBlox Ring?
1.
In the main view of OneSystem, navigate to the left-hand navigation and select ‘ Reports ’ .