Design and function
TIG welding
099-000124-EW501
29.07.2011
27
5.6.4
Select welding task
NOTE
No changes can be made to the basic welding parameters during the welding process.
The welding task is selected using the buttons on the machine control on the welding machine.
Signal lights (LED) display the welding parameter selection.
Set the welding task in the following order:
Symbol Description
0
Welding process button
MMA
welding
TIG
welding
Operating mode button
spotArc (spot time setting range 0.01 sec. to 20.0 sec.)
Non-latched
Latched
TIG pulse welding
TIG automated pulses (frequency and balance)
Select welding parameters button
This button is used to select the welding parameters depending on the welding process and
operating mode used.
Welding parameter setting rotary transducer
Setting flows, times and parameters.
5.6.5
Welding data display
The following welding parameters can be displayed before (nominal values) or during (actual values)
welding.
Parameter
Before welding (nominal values)
During welding (actual values)
Welding current
z
z
Parameter times
z
-
Parameter currents
z
-
