EWM Taurus XQ 350 Synergic D Скачать руководство пользователя страница 8

Страница: 8 / 63

For your safety

Safety instructions

099-005649-EW501

19.11.2020

WARNING

Risk of injury due to radiation or heat!

Arc radiation can lead to skin and eye injuries.

Contact with hot workpieces and sparks can lead to burns.

• Use hand shield or welding helmet with the appropriate safety level (depends on the appli-

cation).

• Wear dry protective clothing (e.g. hand shield, gloves, etc.) in accordance with

the applicable regulations of your country.

• Persons who are not directly involved should be protected with a welding curtain or suitable

safety screen against radiation and the risk of blinding!

Explosion risk!

Apparently harmless substances in closed containers may generate excessive pressure

when heated.

• Move containers with inflammable or explosive liquids away from the working area!

• Never heat explosive liquids, dusts or gases by welding or cutting!

Fire hazard!

Due to the high temperatures, sparks, glowing parts and hot slag that occur during

welding, there is a risk of flames.

• Be watchful of potential sources of fire in the working area!

• Do not carry any easily inflammable objects, e.g. matches or lighters.

• Ensure suitable fire extinguishers are available in the working area!

• Thoroughly remove any residue of flammable materials from the workpiece prior to starting

to weld.

• Only further process workpieces after they have cooled down. Do not allow them to contact

any flammable materials!

Содержание Taurus XQ 350 Synergic D
































































Результаты поиска

Содержание Taurus XQ 350 Synergic D

Отзывы:

Похожие инструкции для Taurus XQ 350 Synergic D

Бренды по названию

Популярные бренды

EWM Taurus XQ 350 Synergic D, Руководство по эксплуатации

Результаты поиска

Содержание Taurus XQ 350 Synergic D

Отзывы:

Похожие инструкции для Taurus XQ 350 Synergic D

Бренды по названию

Популярные бренды