Design and function
MMA welding
099-005649-EW501
19.11.2020
35
• Insert the cable plug on the work piece lead into the "+" welding current connection socket and lock by
turning to the right.
5.3.2 Welding task selection
For selection of the welding task and for general operation see the relevant Control operating instructions.
5.4 MMA welding
5.4.1 Connecting the electrode holder and workpiece lead
CAUTION
Risk of crushing and burns!
When changing stick electrodes there is a risk of crushing and burns!
• Wear appropriate and dry protective gloves.
• Use an insulated pair of tongs to remove the used stick electrode or to move welded work-
pieces.
Figure 5-17
Item Symbol Description
0
1
Connection socket, welding current “–”
2
Connection socket, “+” welding current
3
Workpiece
4
Electrode holder
• Insert the electrode holder plug and workpiece lead into the welding current socket depending on ap-
plication and lock in place by turning to the right. The corresponding polarity will be based on the infor-
mation of the electrode manufacturer on the electrode packaging.
5.4.2 Welding task selection
For selection of the welding task and for general operation see the relevant Control operating instructions.
5.5 Remote control
The remote controls are operated via the 19-pole remote control connection socket (analogue) or
the 7-pole remote control connection socket (digital), depending on the model.
Read and observe the documentation to all system and accessory components!
