EWM Taurus XQ 350 Synergic D Скачать руководство пользователя страница 41

Страница: 41 / 63

Maintenance, care and disposal

Maintenance schedule

099-005649-EW501

19.11.2020

6.3 Maintenance schedule

Examine

Type of

Maintenance step

Only people certified as inspectors or repairers may carry out the rele-

vant work step due to their training! Non-applicable checkpoints are o-

mitted.

pair

• Check and clean the welding torch. Deposits in the torch can cause

short circuits and have a negative impact on the welding result, ulti-

mately causing damage to the welding torch!

• Check wire drive, welding torches, and liner elements for application-

related equipment and setting.

• Clean the wire feed rolls on a regular basis (depending on the degree

of soiling). Replace worn wire feed rolls.

• Connections of welding current leads (check that they are fitted cor-

rectly and secured).

• Is shielding gas cylinder with gas cylinder securing elements

(chain/belt) secured?

• Strain relief: Are hose packages secured with strain relief?

• Checking all supply lines and their connections (pipes, hoses, hose

packages) for damage or leaks.

• Checking the welding system for damage to the housing.

• Transport elements (strap, lifting eyes, handle, wheels, parking brake)

corresponding safety elements (if necessary fuse caps) are present

and flawless?

• Cleaning connections of coolant pipes (quick connect coupling,

connections) from soil and install protective caps if not used.

• Gas test solenoid valve opens and closes properly.

• Checking operating, signalling and indicator lights, protective devices

and actuators.

• Check wire feed roll holder (wire feed rolls must be firmly seated on

their holders and must not have any play)

• Cleaning dirt filter (if applicable)

> see 6.3.1 chapter

• Checking correct mounting of the wire spool.

• Cleaning the outer surfaces with a damp cloth (no aggressive cleaning

agents).

• Cleaning power source (inverter)

> see 6.3.4 chapter

• Cleaning heat exchanger (torch cooling)

> see 6.3.3 chapter

• Coolant change (welding torch cooling)

> see 6.3.2 chapter

• Periodic inspection and testing

> see 6.3.5 chapter

Содержание Taurus XQ 350 Synergic D
































































Результаты поиска

Содержание Taurus XQ 350 Synergic D

Отзывы:

Похожие инструкции для Taurus XQ 350 Synergic D

Бренды по названию

Популярные бренды

EWM Taurus XQ 350 Synergic D, Руководство по эксплуатации

Результаты поиска

Содержание Taurus XQ 350 Synergic D

Отзывы:

Похожие инструкции для Taurus XQ 350 Synergic D

Бренды по названию

Популярные бренды