EWM T 4.01, Руководство по эксплуатации

Страница: 69 / 71

Appendix
Parameter overview – setting ranges
099-00T401-EW501
01.02.2022
69
8 Appendix
8.1 Parameter overview – setting ranges
8.1.1 TIG welding
Name Display Setting range
Co
de
S
tand
ar
d
Un
it
min
.
max.
Main current AMP, depending on power source - A - - -
Gas pre-flow time 0,5 s 0 - 20
Start current, percentage of AMP 20 % 1 - 200
Start current, absolute, depending on power source - A - - -
Start time 0,01 s 0,01 - 20,0
Up-slope time
1,0 s 0,0 - 20,0
Pulse current 140 % 1 200
Pulse time [1] 0,01 s 0,00 - 20,0
Slope time (time from main current AMP to secondary cur-
rent AMP%)
0,00 s 0,00 - 20,0
Secondary current, percentage of AMP 50 % 1 200
Secondary current, absolute, depending on power source - A - -
Pulse pause time [1] 0,01 s 0,00 - 20,0
Slope time (time from main current AMP to secondary cur-
rent AMP%)
0,00 s 0,00 - 20,0
Down-slope time
1,0 s 0,0 - 20,0
End current, percentage of AMP 20 % 1 - 200
End current, absolute, depending on power source - A - - -
End current time 0,01 s 0,01 - 20,0
Gas post-flow time 8 s 0,0 - 40,0
Electrode diameter, metric 2,4 mm 1,0 - 4,0
Electrode diameter, imperial 92 mil 40 - 160
spotArc time 2 s 0,01 - 20,0
spotmatic time ( > )
200 ms 5 - 999
spotmatic time ( > ) 2 s 0,01 - 20,0
AC commutation optimisation [1], [2], [3] 250 5 - 375
AC balance (JOB 0) [1], [2] % -30 - +30
AC balance (JOB 1-100) [2] 65 % 40 - 90
Current jump [3] 1 A 1 - 20
Current jump [4] 1 A 1 - 10
Re-igniting after arc interruption
[3] 5 s 0,1 5
AC frequency [2] [4] - Hz 50 - 200
AC frequency (JOB 0) [1], [2], [3] - Hz 30 - 300
AC frequency (JOB 1-100) [1], [2] 50 Hz 30 - 300
Pulse balance 50 % 1 - 99
Pulse frequency (mean value pulsing, DC voltage) 2,8 Hz 0,2 - 2000
Pulse frequency (mean value pulsing, DC voltage) [1] 2,8 Hz 0,2 - 5
Pulse frequency (metallurgical pulsing) [3] 50 Hz 50 - 15000
Pulse frequency (metallurgical pulsing)
[4] 50 Hz 5 - 15000
activArc, depending on main current
0 - 100