Design and function
MIG/MAG welding
34
099-005548-EW501
27.10.2017
5.3.5.2 Operating point setting using material thickness
Automatic display mode switching:
If the wire speed or the voltage is changed, the display will switch briefly to show the respective
parameter. This means that you don't have to change the display mode before setting the
parameter.
Figure 5-18
5.3.5.3 Arc length correction setting
Setting range: -5 V to +5 V
Figure 5-19
The basic settings are now completed. Other welding parameters have already been set optimally
in the factory; they can, however, be modified to suit individual requirements.
5.3.6
Further welding parameters
• Preselection: Select a MIG/MAG JOB
> see 5.3.4 chapter
.
EXIT
ENTER
NAVIGATION
2s
2s
Figure 5-20
Display
Setting/selection
Gas pre-flow time
