Design and function
Power-saving mode (Standby)
50
099-005548-EW501
27.10.2017
5.7
Power-saving mode (Standby)
You can activate the power-saving mode by either pressing the push-button
> see 4.4 chapter
for a
prolonged time or by setting a parameter in the machine configuration menu (time-controlled power-
saving mode
)
> see 5.6 chapter
.
When power-saving mode is activated, the machine displays show the horizontal digit in the
centre of the display only.
Pressing any operating element (e.g. turning a rotary knob) deactivates power-saving mode and the
machine is ready for welding again.
